hw>Gernot.schachinger@brueckner.com No edit summary |
m 1 revision imported |
||
(No difference)
| |||
Latest revision as of 10:52, 9 March 2026
1 Motor brake[edit | edit source]
This article is about how to connect the motor brake with the Sinamics drive.
2 Connector assignment[edit | edit source]
Before switching on the Sinamics Drive, make sure the wires are connected according to the polarity of the motorbrake.
Pin number 4 BD1+ is for this cable the Positive connection and is the black wire.
Pin number 5 BD1- is the negative connection and is the white wire.
On the other side of the cable connect the wires according the polarity.
