YM:TSM OptiMix

1 Overview

For internal connections (communication) see:

Private Article about TSM Optimix

• Supervisor Password: 5560 (calibration & diagnostics)

2 Preparations

• Air pressure: 6-8 bar
• Reference weight: 2 kg
• Make sure that grounding is done properly, to avoid electrostatic charged resin.

3 Calibrate hopper

See Quick Start Manual step 1-4.

4 Self Test

It its recommend to run a Self Test of the blender after the commissioning has been finished.
In order to run the Self Test please navigate as follows:
1. Template:Image
2. Enter password 5560 (press hand icon in order to enter the password)
3. Template:Image (sorry for the bad quality but this icon looks like a stethoscope)
4. Template:Image

5 Save a backup of the configuration to the SD card and add to SVN

1. Press Template:Image on the touch screen and enter the password 5560 (press hand icon in order to enter the password)
2. Press Template:Image and Template:Image to open the screen shown here:

Template:Image

3. In order to save the current configuration file on the SD-card you need to press the green arrow of option 2.
File name: config.bak

The slot of the card is located on the right side of the junction box where the red light is mounted:

Template:Image

4. Copy the config.bak to your computer, re-name (e.g. alf661tx2a011) and add it to the SVN

As you will see the data stored on the SD-card not only contains the current configuration, the backup but also a data log of alarm messages. Template:Notice bms

6 Alarm Messages

To get an overview of the alarm messages please take a look on page 5 to 8 in the Quick Start Manual.
As already mentioned before, all alarm messages are also logged on the SD card where the configuration files are saved.

Definition