1 Description[edit | edit source]
The WERMA eSign 9 Segment signal lamp replaces the Funke&Huster lamp as used at Winder, AuxWinder, CastingUnit, MDO, Pullroll.
It is ordered with a BMS specific configuration which covers all needed applications.
When the outputs for two or more colors are set at the same time, the lamp uses it's "autoscale" function and divides the segements accordingly.
2 Ordered Configuration[edit | edit source]
3 Cable Layout[edit | edit source]
The original werma cable has the following pin layout:
4 Special cases[edit | edit source]
It is possible to use the configuration software to implement differnt color schemes and sounds. A USB connection is needed.
This shall only be done in special cases and should not be necessary in general.
