Public:Micro Epsilon induSENSOR MSC7401

1 Download Configurations with Sensor Tool

• Connect the RS485 on X3 of the amplifier box of Micro Epsilon

• File:MicroEpsilon Serial Cable .jpg
• File:Micro Epsilon Serial Connection.jpg

• Choose for Sensor Group induSENSOR
• Choose for Sensor Type induSENSOR MSC7401
• Hook the checkboxes and press the search symbol

File:Micro Epsilon Sensor Finder.JPG

• Start Data Transfer of the sensor -> Info -> Import Settings (InduSensor_MSC7401.csv)
  

location:\\Kom\_engineering\public\sensors\Micro-Epsilon\InduSensor_MSC7401.csv

File:Micro Epsilon Data Record.JPG

File:Micro Epsilon Adjustment Import.JPG

• Now you should see the following configuration

File:Micro Epsilon Configuration.JPG

2 Exchange a faulty Sensor Sleeve

• Go online with the Sensor Tool like as it´s mentioned above
• Change to the Single Value-Window

File:Micro Epsilon Signal Value.JPG

• Open the Screws of Sensor Sleeve and surveyor-staff

File:Micro Epsilon Zero Min Position Drawing.JPG

File:Micro Epsilon Zero Magnet Ring.jpg

• Push the sleeve without distance peace against the support and re-tight the Sensor Sleeve on 4mA
• Move the surveyor-staff to the previous good value of the PVSS-Trend and tight it again
• Now you should be able again to move the Relax-System
• Move the faulty side to 0mm Stroke and take care that the new surveyor-staff shows 0mm again