1 Install[edit | edit source]
Check the difference between wall and the sensorfront: File:FTC968 968Z BA032 Install.png
2 Settings[edit | edit source]
File:FTC968 968Z BA032 Setting.png Adjust sensitivity always with a probe of the raw material (e.g. in a smal bag)
3 Output States[edit | edit source]
The red LED is on if the fault condition appers.
| Min | Max | |
| Signalouput (3) without Material | FALSE | TRUE |
| Red LED state without Material | TRUE | FALSE |
| Signalouput (3) with Material | TRUE | FALSE |
| Red LED state with Material | FALSE | TRUE |
