1 Adjustment of Bolt lubrication control modules[edit | edit source]
- press 3-4sec Template:Image to enter the parameter menu
- Press one time Template:Image to enter the speed menu
- With Template:Image and Template:Image parameter values can be changed
2 Calculation rpm[edit | edit source]
FOK 4.8:
- Diameter: Chain wheel 1194,4 mm
- Circumference Chain wheel: 3,75m
- Formula: Angular Speed = (Linear Speed) / (Pi*Diameter)
- Rotation Speed chain wheel
- At maximum speed (525 m/min): 139,2 rpm (setting: rpm Template:Image: 150)
- At minimum speed (25 m/min or less): 6,66 rpm (setting: rpm Template:Image: 6)
- This setting are done in the speed menu
3 Parameter Menu[edit | edit source]
Press 3 sec the Template:Image button and log on to parameter menu Go through the menu with Template:Image and change the parameter and change the parameter according to the list with Template:Image and Template:Image
- Sclae : 1
- Hyst : off
- onDel :0s
- Del : 10s
- Mem : no
- NC
After setting the parameter press again 3 sec Template:Image to safe the parameter and change back to the basic display
