Revision as of 09:32, 18 January 2017 by hw>Dop
1 Maintenance[edit | edit source]
Refer to the attached Maintenance Instruction
1.1 Troubleshooting[edit | edit source]
On JPS 1796 there was an encoder Problem with Winder W02 after some months of production. Rekofa then suggested as a trial to
- First: Turn the winder continuously in the opposite direction for at least 15 minutes
- Second: Continuously turn the winder at least 15 minutes in the normal operating direction
This procedure actually helped at first until a service man from Rekofa arrives on site!
