Last edited 2 months ago
by Max Mustermann

Spindle Cutter Limit Switch Adjustment

Revision as of 15:18, 11 January 2022 by hw>Ofa
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Template:Infobox bms

1 Adjustment[edit | edit source]

  • Adjust the switchover lever on both sides.
  • The photos (left/right switch) below are for orientation.

File:Bernstein Limit Switch 6.jpg File:Bernstein Limit Switch 5.jpg

2 Note[edit | edit source]

  • Make sure that the switchover lever has enough range of movement, but is still switch when triggered.

File:Bernstein Limit Switch 2.jpg File:Bernstein Limit Switch 3.jpg

  • The switchover lever must not touch the housing of the Spindle Cutter and must only be activated by the cam.

File:Bernstein Limit Switch 4.jpg

Retrieved from "https://52x.test.hw.local/w/index.php?title=YM:Spindle_Cutter_Limit_Switch_Adjustment&oldid=3613"