hw>Mom |
(No difference)
|
Latest revision as of 05:14, 24 May 2023
1 Description[edit | edit source]
This article shall provide an overview to all load cell applications in a line and shall link to the detailed specific articles.
EEC hereby determines a procedure to unify parameter setup for WinCC objects related to Siwarex weighing modules.
FacMul Unit adjustment (e.g. kg > N =9,81 ; if no conversion is necessary, factor remains at 1.0)
FacDiv Adjust factor according geometry (wrap angle)
2 Silo and Dosing Units Raw Material Weighing[edit | edit source]
3 Casting Unit Pinning Wire Band Tension[edit | edit source]
Load Cell Type Burster:
Private:New Pinning HVC30#Load_cell
4 MDO Filmtension Measurement[edit | edit source]
All information about MDO Film tension Measurement, LoadCell Types and WinCC parameters can be found here:
Public:MDO Film Tension Measurement
5 Winder Filmtension Measurement[edit | edit source]
All information about Winder Film Tension Measurement, Load Cell Types, WinCC and Siwarex Parameters can be found here:
Public:Winder Film Tension Measurement
6 TDO Chain Lubrication Oil Tank Weighing[edit | edit source]
All information about Chain Lubrication Oil Tank Weighing, Load Cell Types, WinCC and Siwarex Parameters can be found here:
Private:Chain Lubrication#Types_of_Load_Cells
7 Unloader Jumbo Roll Weighing[edit | edit source]
Private:Electric Unloader (no hydraulics)#Load_cells_on_the_lifting_device
