hw>Ofa No edit summary |
m 1 revision imported |
(No difference)
| |
Latest revision as of 10:53, 9 March 2026
1 Adjustment[edit | edit source]
- Adjust the switchover lever on both sides.
- The photos (left/right switch) below are for orientation.
File:Bernstein Limit Switch 6.jpg File:Bernstein Limit Switch 5.jpg
2 Note[edit | edit source]
- Make sure that the switchover lever has enough range of movement, but is still switch when triggered.
File:Bernstein Limit Switch 2.jpg File:Bernstein Limit Switch 3.jpg
- The switchover lever must not touch the housing of the Spindle Cutter and must only be activated by the cam.
