YM:MDO MD15

1 Overview

The MDO has one adjustable stretching gap and various adjustable nip rolls, some of them are powered by T&R encoTRives.

File:MD15 Pvss.png

• Top View
  Top View
• Nip Roll Adjustment
  Nip Roll Adjustment
• Streching Gap
  Streching Gap

2 Streching Gap

The allowed range is mechanically limited by Nip roll 3.2 and 4.1.

File:MD15 strechinggap.png

File:MD15 strechinggap2.png

2.1 Calibration

Close = 100 mm

Open = 160 mm

3 Nip Roll Adjustment

File:MD15 Nip.PNG

3.1 Calibration

File:MD15 Nip2.PNG

There are two different guide rails:

• Guide rails
  Guide rails
• How to measure
  How to measure

Template:Notice bms

The offset between metal block + caliper measurement and scale measurement is 49 mm (185mm guide rail => 121,6 - 72,6) or 69,5 mm (245mm guide rail => 142,1 - 72,6).

e.g. if you measure 123,2 mm with caliper and you got the short guide rail, your calibration value is 123,2 - 49 = 74,2 mm (as shown on the scale)

• Calibration values for short guide rail (185mm):

0° => 121,6 mm (caliper) => 72,6 mm (measuring scale, WinCC) for Nip 3.2 and Nip 4.1

0° => 123,6 mm (caliper) => 74,6 mm (measuring scale, WinCC) for other Nips

• Calibration values for long guide rail (245mm):

0° => 142,1 mm (caliper) => 72,6 mm (measuring scale, WinCC) for Nip 3.2 and Nip 4.1

0° => 144,1 mm (caliper) => 74,6 mm (measuring scale, WinCC) for other Nips