YM:Liebert GXT3 Ups Configuration

This instruction enables the user to configure the Liebert UPS

1 Configuration SNMP Network Adapter

1.1 Network Connection (TCP/IP)

• Establish a connection between the UPS and your Field PG with an Ethernet cable.
• Deactivate local Proxy (Internet option -> connections: deactivate proxy).
• Deactivate Firewall and security programs, like Symantec Endpoint Protection.
• Install, if not yet done, ManageUPS DCU.exe on your Field PG.
• Launch configuration tool ManageUPS DCU.
• Default user is "admin" with default password also "admin".

Template:Image

• Depending if there is an external battery cabinet or not you have to do some settings, as shown above.
• If there is no external battery cabinet, set UPS Battery Capacity Designator to "0" and confirm setting.

• If there is an external battery cabinet, close ManageUPS DCU.exe, connect UPS via Mini-USB cable to USB port of your Field PG and start Liebert GXT3 Configuration program

(Cable is delivered with UPS, Configuration Program can be found on Liebert GXT3 CD)

Template:Image

• Select number of Battery Cabinets to "1 external", apply settings
• Disconnect USB cable, close configuration tool and start ManageUPS DCU.exe again

• Login as user admin using default password admin

Template:Image

• Go to Administration > Network Settings and modify IP address.
  • Enter IP Address Template:KomIp180 (IPC 3.9) / Template:KomIp72 (IPC 4.0)
  • Enter Subnet Mask 255.255.255.0
  • Enter Default gateway Template:KomIp190 (IPC 3.9) / Template:KomIp71 (IPC 4.0)
  • Apply settings and reboot the network adapter via Utilities menu

Template:Image

• After reboot of the network adapter you can use Internet Explorer or ManageUPS DCU.exe to proceed the UPS configuration. Steps are the same, following procedure shows configuration using Internet Explorer

1.2 Internet Explorer

• Open Internet Explorer

• Connect to [http://Template:KomIp180 http://Template:KomIp180] (IPC 3.9) / [http://Template:KomIp72 http://Template:KomIp72] (IPC 4.0)
• User Name: admin
• Password: admin

1.2.1 Menu: A3000-RT

• Configuration:
  • Adjust Overload Threshold to 80% > Apply
  • Battery Replacement Date mm/dd/yyyy (today!) > Apply
  • UPS Name: Template:KomNamUps > Apply

Template:Image

1.2.2 Menu: Logging

• Date and Time Settings
  • NTP Settings
    • NTP Server Template:KomIp1
    • Update Time Using NTP Now
  • Apply

Template:Image

1.2.3 Event Messaging

1.2.3.1 SNMP Traps

• SNMP Trap Designations
  • Community: public
  • Destination Address: Template:KomIp1
• Apply

Template:Image

1.2.3.2 SNMP Communities

• If a entry exists in Name and Address delete it!
• Apply

Template:Image

1.2.4 Network Shutdown

• Network Shutdown Controller Settings
  • Network Shutdown Controller Enabled
  • UPS off delay: wait 8 minutes after execution of last group…
  • Cancel UPS Shutdown if Utility Power returns after execution of last group
• Group 1 Settings
  • Execute after 5 minutes on battery
  • Protocoll: RCCMD
  • IP Address From: Template:KomIp200 To 220
  • IP Address From: Template:KomIp254 To 254
  • IP Address From: 172.xx.yy.15 To 15 (here xx.yy according to service network)
  • Port for Shutdown Sequence: 6003
  • Port for Restart Sequence: 6003

• Group 2 Settings
  • Execute after 7 minutes on battery
  • Protocoll: RCCMD
  • IP Address from: Template:KomIp1 To 1
  • Port for Shutdown Sequence: 6003
  • Port for Restart Sequence: 6003

Template:Image

1.2.5 Administration

1.2.5.1 Security

• Admin User Settings
  • User Name: admin
  • Password: must be generated with Enigma 2000.
• User Access Settings
  • Web Authorization Options: All Pages except Status Page

Template:Image

1.2.5.2 Network Settings

• TCP/IP Settings
  • Device Name: Template:KomNamUps
  • Host Name: Template:KomNamUps

Template:Image

Template:Notice bms

2 Clientinstallation Server (RedHat/Suse 6.3 linux with "unattended DVD"

• Log on as root
• If it will be installed at Suse 6.3 enter following command (not standard!)
• ln -s /usr/lib/libncurses.so /usr/lib/libncurses.so.5
  • (At RedHat this step does not apply)
• Mount DVD-Unattended with:
  • mount /dev/cdrom /mnt
  • cd /mnt/server/UPS_MASTERGUARD_FOR_RHEL_4.0
  • cp rccmdinst.tar /tmp
  • cd /tmp
  • tar xfv rccmdinst.tar
  • cd generex
  • ./install
• Enter License_Key (SIERX3-584435) and confirm with Enter (or use real license key when present)

• Select Version of your Operating System: -> Enter
• Please choose a directory to install the files -> Enter
• Do you want to read information for RCCMD tool? n -> Enter
• Install RCCMD Modul for LINUX_X86 to /usr/ups/? y -> Enter
• Language for RCCMD Messages? english -> Enter
• Do you want to configure RCCMD now? y -> Enter
  • Create rccmd.cfg? -> Enter
  • RCCMD Network Options -> Enter
    • Bind on interface: Template:KomIp1 -> OK
    • Access control list -> ADD
    • New Address: Template:KomIp180 -> SAVE
• Do you want to start rccmd-listener automatically on system boot? y -> Enter
• Do you want to enable massages via /usr/bin/wall? n -> Enter
• Do you want to enable logging of network massages to syslog? y -> Enter
• Do you want to enable graphical popup messages? n -> Enter
• Do you want to start rccmd-listener now? y -> Enter

• Leave the /mnt directory (cd /)
• Umount CD: (umount /mnt)
• Remove CD

3 Troubleshooting

3.1 Reset Password

In order to reset the password you have to log on at the console with following parameters:

• User Name: iforgot

• Password: MAC-Address of the UPS (in this form: 00:20:82:01:7B:85)